Beko HXI64200AT User Manual - Page 12
Future, Transportation
View all Beko HXI64200AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
When installing the hob onto a cabinet, a shelf must be installed in order to separate the cabinet from the hob as illustrated in the above figure. This is not required when installing onto a built-under oven. For example, if it is possible to touch the bottom of the product since it is installed onto a drawer, this section must be covered with a wooden plate. min. 15 mm Rear view (connection holes) DANGER: I Making connections to different holes is not a good practice in terms of safety since it can damage the gas and electrical system. DANGER: There are gas and electric components on hobs. Therefore stove, only the connection hole shown in this manual should only be fixed to the unit as shown in the manual using the supplied fasteners and screws supplied. Otherwise, it is dangerous to the life and property safety. Final check 1. Connect the power cable and switch on the product's fuse. 2. Check the functions. Future Transportation • Keep the product's original carton and transport the product in it. Follow the instructions on the carton. If you do not have the original carton, pack the product in bubble wrap or thick cardboard and tape it securely. Check the general appearance of your product or any damages that might have occurred during transportation. 1 2/EN