Beko HXI64200AT User Manual - Page 20
Beko HXI64200AT Manual
View all Beko HXI64200AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table-1: Operation time limits Temperature level Operation time limit - hour 0 0 1 6 2 6 3 5 4 5 5 4 6 1,5 7 1,5 8 1,5 9 20 minutes P (Booster) 5 minutes (1 (") The hob will di op to level 9 after 5 minutes Overheating protection Your hob is equipped with some sensors which provide protection against overheating. Following may be observed in case of overheating: • Operating cooking zone may get switched off. • Selected level may drop to level 7 from higher level. Overflow safety system Your hob is equipped with an overflow safety system. If there is any overflow that spills onto the control panel, the system will cut the power connection immediately and switch off your hob. "E" warning appears on the indicator during this period. Precise power setting Induction hob reacts the commands immediately as an operating principle. It changes the power settings very fast. Thus, you can prevent a cooking pot (containing water, milk and etc.) from overflowing even if it was just about to overflow. Operating noisy Some sounds may come from the induction hob. These sounds are normal and a part of induction cooking. • Noise becomes prominent in high temperature levels. • Alloy of the saucepan can cause noise. • In low levels, a regular on/off sound can be heard because of the operating principles. • Noise can be heard if an empty saucepan is heated. When you put water or food in it, this sound will clear away. • The noise of the fan that cools electric system can be heard. Error messages Table-2: Error codes and error causes Error cause Two or more keys are pressed Hob is overheated Indicator The "E" symbol blinks The "H" symbol blinks Display Cooking zone display Cooking zone display For further information about error messages hat may appear on the touch control panel, see Table-2. OIf the surface of the touch control panel is exposed to intense vapor, entire control i system may become deactivated and give error signal. 0 Keep the surface of the touch control panel clean. Erroneous operation may be observed. 20/EN