Beko KDG611 User Manual - Page 15
Beko KDG611 Manual
![]() |
View all Beko KDG611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store. • Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: • Brown cable = L (Live) • Blue cable = N (Neutral) • Green/yellow cable must be connected to ground (E)= line. With the alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. Green and yellow or green N: Blue or bbek Brown.or red g DANGER: l\i I • ' Before starting any work on the gas installation, disconnect the gas supply. There is the risk of explosion! • Gas adjustment conditions and values are stated on labels (or ion type label). • In the UK, Gas Safe registered installers (Including the Regions of British Gas) undertake to work to safe and satisfactory standards. Regulations The cooker must be installed in accordance with the Gas Safety (Installation and Use) Regulations and the relevant Building Regulations in force. Your product is equipped for natural gas (NG). The cooker is designed for UK installation using a flexible connection with tubing in accordance with the regulations in force. Length of 900mm is recommend. Make sure that the natural gas valve is readily accessible. Service Representative will remove the plug during connection and connect your appliance by means of a straight connection device (coupling). If a flexible hose is used it must not come into contact with the top 150mm/6 inches (hot region) of the rear of the appliance. Do not pass the hose through the (**) hot regjonbehind,the oven. UK Plug A. DANGER: I • Before starting any work on the electrical installation, disconnect the product from the mains supply. There is the risk of electric shock! Plug the power cable into the socket. Gas connection , DANGER: A• I Product can be connected to gas supply system only by an authorised and qualified person or technician with licence. Risk of explosion or toxication due to unprofessional repairs! Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised or unlicensed persons. (**) Hot region If you need to use your appliance later with a different type of gas, you must consult an authorised service centre for the related conversion procedure. 1 5/EN
![](/manual_guide/products/beko-kdg611-user-manual-b5ca0b0/15.png)