Beko KDG611 User Manual - Page 6

outlet/line

Page 6 highlights

main control valve, unless it's in a confined space or cellar. • Check all tubes and connections for tightness. If you still smell gas leave the property. • Warn the neighbours. • Call the fire-brigade. Use a telephone outside the house. • Call the Gas Emergency Services immediately on 0800 111 999. If you have door or gates that are secured by an electric lock, or entry phone, please open these manually. • Do not re-enter the property until you are told it is safe to do so. Electrical safety • If the product has a failure, it should not be operated unless it is repaired by an Authorized Service Agent. There is the risk of electric shock! • Only connect the product to a grounded outlet/line with the voltage and protection as specified in the "Technical specifications". Have the grounding installation made by a qualified electrician while using the product with or without a transformer. Our company shall not be liable for any problems arising due to the product not being earthed in accordance with the local regulations. • Never wash the product by spreading or pouring water onto it! There is the risk of electric shock! • Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by holding the plug. • The product must be disconnected during installation, maintenance, cleaning and repairing procedures. • If the power connection cable for the product is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The appliance must be installed so that it can be completely disconnected from the mains supply. The separation must be provided by a switch built into the fixed electrical installation, according to construction regulations. • Rear surface of the oven gets hot when it is in use. Make sure that the gas/electrical connection does not contact the rear surface; otherwise, connections can get damaged. • Do not trap the mains cable between the oven door and frame and do not route it over hot surfaces. Otherwise, cable 6/EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

main
control
valve,
unless
it's
in
a
confined
space
or
cellar.
Check
all
tubes
and
connections
for
tightness.
If
you
still
smell
gas
leave
the
property.
Warn
the
neighbours.
Call
the
fire
-brigade.
Use
a
telephone
outside
the
house.
Call
the
Gas
Emergency
Services
immediately
on
0800
111
999.
If
you
have
door
or
gates
that
are
secured
by
an
electric
lock,
or
entry
phone,
please
open
these
manually.
Do
not
re-enter
the
property
until
you
are
told
it
is
safe
to
do
so.
Electrical
safety
If
the
product
has
a
failure,
it
should
not
be
operated
unless
it
is
repaired
by
an
Authorized
Service
Agent.
There
is
the
risk
of
electric
shock!
Only
connect
the
product
to
a
grounded
outlet/line
with
the
voltage
and
protection
as
specified
in
the
"Technical
specifications".
Have
the
grounding
installation
made
by
a
qualified
electrician
while
using
the
product
with
or
without
a
transformer.
Our
company
shall
not
be
liable
for
any
problems
arising
due
to
the
product
not
being
earthed
in
accordance
with
the
local
regulations.
Never
wash
the
product
by
spreading
or
pouring
water
onto
it!
There
is
the
risk
of
electric
shock!
Never
touch
the
plug
with
wet
hands!
Never
unplug
by
pulling
on
the
cable,
always
pull
out
by
holding
the
plug.
The
product
must
be
disconnected
during
installation,
maintenance,
cleaning
and
repairing
procedures.
If
the
power
connection
cable
for
the
product
is
damaged,
it
must
be
replaced
by
the
manufacturer,
its
service
agent
or
similarly
qualified
persons
in
order
to
avoid
a
hazard.
The
appliance
must
be
installed
so
that
it
can
be
completely
disconnected
from
the
mains
supply.
The
separation
must
be
provided
by
a
switch
built
into
the
fixed
electrical
installation,
according
to
construction
regulations.
Rear
surface
of
the
oven
gets
hot
when
it
is
in
use.
Make
sure
that
the
gas/electrical
connection
does
not
contact
the
rear
surface;
otherwise,
connections
can
get
damaged.
Do
not
trap
the
mains
cable
between
the
oven
door
and
frame
and
do
not
route
it
over
hot
surfaces.
Otherwise,
cable
6/EN