Beko LNP2685ED User Manual - Page 10

3 Installation 3.1. Appropriate installation location 3.2. Installing the plastic wedges Contact an Authorized Service for the installation of the product. In order to prepare the product for use, refer the information in the user manual and ensure that electrical installation and water installation are appropriate. If not, call a qualified electrician and technician to have any necessary arrangements carried out. Plastic wedges supplied with the product are used to create the distance for the air circulation between the product and the rear wall. Insert the 2 plastic wedges onto the rear ventilation cover as illustrated in the figure. WARNING: Manufacturer shall B not be held liable for damages that may arise from procedures carried out by unauthorized persons. WARNING: Product must B not be plugged in during installation. Otherwise, there is the risk of death or serious injury! WARNING: A If the door clearance is not enough to pass the product through, the doors can be carefully removed to allow this. • Place the product on an even floor surface to prevent jolts. • Install the product at least 30 cm away from heat sources such as hobs, heater cores and stoves and at least 5 cm away from electrical ovens. • Product must not be subjected to direct sun light and kept in humid places. • Appropriate air ventilation must be provided around your product in order to achieve an efficient operation. If the product is to be placed in a recess in the wall, pay attention to leave at least 5 cm distance with the ceiling and side walls. 10 / 28 EN Refrigerator/User Manual