Beko LNP2685ED User Manual - Page 11

Installation • The condenser of your appliance is located on the back as shown below. In order to achieve better energy efficiency with lower energy consumption, please pull the condenser towards yourself as illustrated in picture below. The condenser position will be fixed firmly by means of locking mechanisim of the top holders on each side. * OPTIONAL v 3.3. Adjusting the feet If the product stands unbalanced after installation, adjust the feet on the front by rotating them to the right or left. 3.4. Electrical connection A WARNING: Do not make connections via extension cables or multi-plugs. B WARNING: Damaged power cable must be replaced by the Authorized Service Agent. If two coolers are to be C installed side by side, there should be at least 4 cm distance between them. • Our company shall not be liable for any damages that will arise when the product is used without grounding and electrical connection in accordance with the national regulations. • Power cable plug must be within easy reach after installation. • Connect your refrigerator to a grounded outlet rated for a voltage value of 220-240V /50 Hz. Outlet shall have 10 to 16A fuse. Refrigerator/User Manual 11 / 28 EN