Beko OIM25901 User Manual - Page 39

Troubleshooting pven emits steam when it is in use. • It is normal that steam escapes during operation. >>> This is not a fault. oduct emits metal noises while heating and cooling" • When the metal parts are heated, they may expand and cause noise. >>> This is not a fault oduct does not operate. • The mains fuse is defective or has tripped. >>> Check fuses in the fuse box. Ifnecessary, replace or reset them. • Product is not plugged into the (grounded) socket. >>> Check the plug connection. • Buttons/knobs/keys on the control panel do not function. >>> Keylock may be enabled. Please disable it. (See. Using the keylock, page 26) *en light does not work. • Oven lamp is defective. >>> Replace oven lamp. • Power is cut. >>> Check if there is power. Check the fuses in the fuse box. Ifnecessary, replace or reset the fuses. *en does not heat. • Function and/or Temperature are not set. >>> Set the function and the temperature with the Function and/or Temperature knob/key. • Power is cut. >>> Check if there is power. Check the fuses in the fuse box. Ifnecessary, replace or reset the fuses. Consult the Authorised Service Agent or the dealer where you have purchased the product if you can not remedy the trouble although you have implemented the instructions in this section. Never attempt to repair a defective product yourself. • Used software is based in part on the work of the Independent JPEG Group. • Portions of this software are copyright ©2010 The FreeType Project (www.freetype.org). All rights reserved. • This product contains some GNU General Public License v2 and GNU Lesser General Public License v2.1 licensed code. Copies of GPL v2 and LGPL 2.1 are available from http://www.gnu.org/licenses/licenses.html. Upon written application of customer, theese codes are available at the cost of no more than copying media, packaging, handling and postage. This offer is valid for three years, starting with the initial purchase of product. 39/EN