Beko QOF243B User Manual - Page 11
Installation
![]() |
View all Beko QOF243B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation P oduct must be installed by a qualified person in accordance with the regulations in force. The manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorized persons which may also void the warranty. Preparation of location and electrical installation for the product is under ustomer's responsibility. „ DANGER: A• I The product must be installed in accordance with all local electrical regulations. DANGER: • Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety. Before installation The appliance is intended for installation in commercially available kitchen cabinets. A safety distance must be left between the appliance and the kitchen walls and furniture. See figure (values in mm). • Surfaces, synthetic laminates and adhesives used must be heat resistant (100 °C minimum). • Kitchen cabinets must be set level and fixed. • If there is a drawer beneath the oven, a shelf must be installed between oven and drawer. • Carry the appliance with at least two persons. • The following installation drawings are representational and may not match exactly with your appliance. Do not install the appliance next to refrigerators or freezers. The heat emitted by the appliance will lead to an increased energy consumption of cooling appliances. he door and/or handle must not be used or lifting or moving the appliance. If the appliance has wire handles, push the handles back into the side walls after moving the appliance. 11 /EN
![](/manual_guide/products/beko-qof243b-user-manual-6c2616c/11.png)