Beko TBN6602 Owners Manual - Page 6

1 Important instructions for safety and environment 1.6 Plug Wiring The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not to be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug Fuse covers are availabe from any good electrical store. •• Fiting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: •• Brown cable = L (Live) •• Blue cable = N (Neutral) •• Green/yellow cable must be connected to ground (E) line With the alternative plugs a 13 A fuse must be fitted either in the plug or adaptore or in the main fuse box. If in doubt contact a qualified electrician. 6 / 12 EN Hand Blender Set / User Manual