Beko TBN6602 Owners Manual - Page 9

3 Operation To prevent overflowing of the C mixture do not overfill the measuring beaker (10) or bowl. Smaller amounts are easier to process. C To prevent any accidents use the beaker lid as anti-slip rubber pad by putting the beaker base on the lid. If you would like to use the blending C attachment directly in the pot, first take the pot off the stove to prevent the blending attachment from overheating. 3.4 Chopping Do not chop extremely hard items C such as coffee beans, ice cubes, nutmeg, grains or bones. Remove stalks from herbs, shells from nuts and bones, tendons and gristle from meat. C Cut the food in small pieces. WARNING: Never operate the A appliance if the chopping lid is not properly seated on the chopping bowl, as this could damage the chopping blade. 5. Put the motor unit (3) on the chopping lid (6). Push the motor unit so that it is firmly locked in place. Make sure the motor unit is securely attached to the chopping lid. C During operation always hold the chopping bowl with one hand to prevent it from tipping over. 6. Insert the plug into the wall socket. 7. Press and hold down the On/Off button (1). - The appliance starts operating. 8. Press and hold the turbo button (2). C Do not use the appliance continuously for more than 10 seconds. C To achieve the best results press the On/Off button or turbo button intermittently. 1. Put the chopping bowl (8) on an even surface. 2. Place the chopping blade (7) onto the fixed shaft in the chopping bowl (8). A WARNING: Be careful when inserting the chopping blade (7) as it is very sharp. A WARNING: Do not touch the chopping blade with bare hands. 9. Release the On/Off button (1) or turbo button (4) when you finish the process and disconnect the power plug from the wall socket. Remove the motor unit (3) from the chopping lid (8) by pushing the attachment release buttons (4) at the sides of the appliance and pulling it off. Take the chopping lid (6) off. Take the chopping blade (7) out of the chopping bowl (8) carefully prior to removing the chopped food. 3. Place the ingredients in the chopping bowl (8). 4. Put the chopping lid (6) on the chopping bowl (8). Make sure that the claws on the chopping lid are firmly locked on the bowl. Hand Blender Set / User Manual 9 / 12 EN