Beko VCM7180P Owners Manual - Page 11

4 Cleaning and care 4.2 Emptying the dust container 1. Press the dust container removal button (2) to remove the dust container (5) and remove the dust container. 2. Push the dust container removal latches located at the back of the dust container (5) from both sides. 4. After removing the motor protection filter, you will see the metal handle on the cyclone separator. Holding this handle, remove the cyclone separator from the dust container (5). 5. Clean the cyclone separator and the dust container (5) compartment with a soft brush and wipe them with a damp cloth. A WARNING: Cyclone separator should not be immersed in water. 4.4 Cleaning the filters •• Open the dust container (5) cover and empty the container. 3. When you have emptied dust, close the dust container cover (5); a click sound will be heard. 4. Insert the dust container (5) back into its location. 4.3 Cleaning the cyclone separator 1. Press the dust container removal button (2) and remove the dust container. 2. Press the top edge of the opening button for the motor protection filter (MIF) housing (8) and open the cover. 3. Remove the motor protection filter (MIF) located inside. Replace your filters at regular intervals according to the frequency of use. It is recommended that you replace the filters every 6 months for average use. For replacement filters please visit the Beko website www.beko.co.uk While you empty the dust accumulated in the dust container to clean the container, you need to clean the motor protection filter, the foam filter and HEPA filter as well. A WARNING: Do not use appliances producing hot air such as hair dryer or heater to dry the filters. A WARNING: Do not install the filters without completely drying them; otherwise, smell of moisture may occur during use, water can leak from the back of the appliance or the filters may get damaged. A WARNING: Attach the filters into their places after they have dried. Vacuum Cleaner / User Manual 11 / 13 EN