Beko VCM7180P Owners Manual - Page 12
Storage
View all Beko VCM7180P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4 Cleaning and care 4.4.1 Motor protection filter (MIF) This filter is located on the dust container. 1. Press the dust container removal button (2) and remove the dust container (5). 2. Press the top edge of the opening button for the motor protection filter (MIF) housing (8). 3. Remove the motor protection filter by pulling it. 4.4.3 HEPA filter 1. Push down the rear cover opening latch to open the cover and remove the HEPA filter by pulling it from its handle. HEPA filter 2. You can wash the filter under running water after shaking it off. 3. If you wash the HEPA filter, dry it at room temperature (for 24 hours minimum). Do not use it before ensuring that it is completely dry. 4. For a longer service life, you can clean the HEPA filter by hitting it on a hard surface instead of washing it. Thus the dusts accumulated on the HEPA filter will leave the filter as you hit it on a hard floor. 4. After shaking if off, wash it under running water, wring it out gently and leave it to dry (for 24 hours minimum). 4.4.2 Foam filter 1. Push down the rear cover opening latch to open the cover. 2. Remove the foam filter behind the cover and wash it. Foam filter 3. After shaking if off, wash it under running water, wring it out gently and leave it to dry (for 24 hours minimum). 4.5 Storage •• If you do not intend to use the appliance for a long time, store it carefully. •• Unplug the appliance. •• Keep the appliance out of the reach of children. 4.6 Handling and transportation •• During handling and transportation, carry the appliance in its original packaging. The packaging of the appliance protects it against physical damages. •• Do not place heavy loads on the appliance or on the packaging. The appliance may get damaged. •• Dropping the appliance may render it nonoperational or cause permanent damage. 12 / 13 EN Vacuum Cleaner / User Manual