Beko VCO42701A Owners Manual - Page 10
Dust brush, Crevice tool, 9 Switching off the vacuum, cleaner and parking feature
View all Beko VCO42701A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 Usage Dust brush 1. Grasp it from the dust brush area and pull it backwards slowly. - A click will be heard, indicating that the button on the body has seated into its slot. 2. Attach the end of the handle or the telescopic tube (13) to the inner side of the upholstery tool. - You can now start vacuum cleaning. 3. Pull the accessory to remove it when the process is complete. Crevice tool 3.9 Switching off the vacuum cleaner and parking feature 1. Switch off the appliance with the on/off button (1) and unplug it. 2. Press the cable winding button (3) to wind the cable inside the appliance. Vertical parking feature Attach the hook of the parquet/carpet brush (9) to the parking groove located at the bottom part of the appliance. Horizontal parking feature Attach the hook of the parquet/carpet brush (9) to the parking groove located at the rear side of the appliance. 1. If the accessory is on, press the button found on the body and push it slightly to close. - It clicks. 2. Attach the end of the handle or the telescopic tube (13) to the inner side of the upholstery tool. - You can now start vacuum cleaning. A WARNING: The crevice tool must be adjusted to remain outside. 3. Pull the accessory to remove it when the process is complete. A WARNING: Do not make cleaning by using the handle's (15) end part. 10 / 13 EN Vacuum Cleaner / User Manual