Beko VCO42701A Owners Manual - Page 9
Adjusting the parquet, carpet brush, 6 Adjusting the suction, power, 7 Operation, 8 Accessories,
View all Beko VCO42701A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3 Usage 3.5 Adjusting the parquet/ carpet brush Press the adjustment latch (10) located on the parquet/carpet brush (11) and; •• Vacuum on firm ground and parquet; extend the brush before vacuuming. •• Vacuum on carpets and rugs; retract the brush before vacuuming. 3.6 Adjusting the suction power You can adjust the suction power of the appliance according to the type of the surface to be cleaned. You can turn the suction power adjustment knob (2) found on the appliance's body clockwise to increase the suction power. Turn the suction power adjustment knob anti-clockwise to decrease the suction power. There are four settings for suction power: •• Turn the suction power adjustment knob towards the MAX icon to clean heavily soiled hard surfaces and carpets. 3.7 Operation 1. Plug in the appliance after pulling the power cable located at the back of the appliance. A WARNING: Stop pulling the appliance cable when it comes to the yellow mark located on it. After the yellow mark, the red mark will appear. Do not pull any more after reaching the red mark. 2. Use the suction power adjustment knob (2) found on the appliance to set it to the desired suction power (see 3.6). 3. Press the on/off button (1) to switch on your appliance. 3.8 Accessories Accessories have been designed in one piece to save space and provide practical use. Upholstery tool •• Turn the suction power adjustment knob (2) towards the carpet icon to clean carpets. •• Turn the suction power adjustment knob towards the eco icon to clean curtains, tablecloths and sofas. •• Turn the suction power adjustment knob towards the parquet icon to clean hard surfaces. 1. Grasp it from the dust brush area and pull it backwards slowly. - A click will be heard, indicating that the button on the body has seated into its slot. 2. Attach the end of the handle or the telescopic tube (13) to the inner side of the dust brush. - You can now start vacuum cleaning. 3. Pull the accessory to remove it when the process is complete. Vacuum Cleaner / User Manual 9 / 13 EN