Beko WI1573 User Manual - Page 29

Operating the product 5.13 Starting the programme 1. Press Start / Pause / Cancel button to start the programme. 2. Start symbol showing the startup of the programme will turn on. 3. Loading door is locked and Door Locked symbol appears on the display. 4. The symbol of the step from which the programme has started appears on the display (Prewash, Main Wash, Rinse, Softener and Spin). 5.14 Progress of programme Progress of a running programme is indicated on the display with a set of symbols. Relevant symbol appears on the display at the beginning of each programme step and all symbols remain lit at the end of the programme. The farthermost right symbol indicates the current programme step. Prewash If the Prewash auxiliary function is selected, Prewash symbol appears on the display indicating that the prewash step has started. Main Wash Main Wash symbol indicating that the main wash step has started appears on the display. Rinse Rinse symbol indicating that the rinsing step has started appears on the display. Softener Softener symbol indicating that the softener step has started appears on the display. Spin Appears at the beginning of the final spin step and remains lit during Spin and Pump special programmes. C If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine. 5.15 Loading door lock There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable. Door Locked symbol appears when the loading door is locked. This symbol will flash until the loading door becomes ready to open when programme completes or the machine is paused. Do not force to open the loading door in this step. Symbol disappears when the door is ready to open. You can open the door when the symbol disappears. 5.16 Changing the selections after programme has started Switching the machine to pause mode Press the Start / Pause / Cancel button to switch the machine to pause mode. Pause symbol appears on the display indicating that the machine is paused. Start symbol disappears. F1 F2 F3 F4 Changing the speed and temperature settings for auxiliary functions Depending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection". You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection". Adding or taking out laundry 1. Press the Start / Pause / Cancel button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. 2. Wait until the Loading Door can be opened. 3. Open the Loading Door and add or take out the laundry. 4. Close the Loading Door. Washing Machine /User's Manual 29 / EN