Beko WIY74545 Owners Manual - Page 33

Changing the auxiliary function, speed and temperature Depending on the step the programme has reached, you can cancel or select the auxiliary functions. See, "Auxiliary function selection". You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature selection". C If no change is allowed, the relevant light will flash 3 times. Adding or taking out laundry 1. Press Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. 2. Wait until the Loading Door can be opened. 3. Open the Loading Door and add or take out the laundry. 4. Close the Loading Door. 5. Make changes in auxiliary functions, temperature and speed settings if necessary. 6. Press Start / Pause button to start the machine. 4.6.16 Cancelling the programme To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has been canceled. Your machine will end the programme when you turn the Programme Selection knob; however, it does not drain the water inside. When you select and start a new programme, the newly selected programme will start depending on the step the previous programme was canceled in. For example, it may take in additional water or continue to wash with the water inside. C Depending on the step where the programme was canceled in, you may have to put detergent and softener again for the programme you have selected anew. 4.6.17 End of programme "End" appears on the display at the end of the programme. 1. Wait until the loading door light illuminates steadily. 2. Press On / Off button to switch off the machine. 3. Take out your laundry and close the loading door. Your machine is ready for the next washing cycle. Washing Machine / User's Manual 33 / EN