Beko WMB101433L User Manual - Page 28

Operating the product Changing the speed and temperature settings for auxiliary functions Depending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection". You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection". C If no change is allowed, the relevant light will flash for 3 times. Adding or taking out laundry 1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. 2. Wait until the Loading Door can be opened. 3. Open the Loading Door and add or take out the laundry. 4. Close the Loading Door. 5. Make changes in auxiliary functions, temperature and speed settings if necessary. 6. Press Start / Pause button to start the machine. 5.16 Cancelling the programme To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has been cancelled. Pump function is activated for 1-2 minutes regardless of the programme step, and whether there is water in the machine or not. After this period, your machine will be ready to start with the first step of the new programme. C Depending on the step where the programme was cancelled in, you may have to put detergent and softener again for the programme you have selected anew. 5.17 End of programme "End" appears on the display at the end of the programme. 1. Wait until the loading door light illuminates steadily. 2. Press On / Off button to switch off the machine. 3. Take out your laundry and close the loading door. Your machine is ready for the next washing cycle. 5.18 Your machine is equipped with a "Standby Mode" In case of not starting any programme or waiting without making any other operation when the machine is turned on by On/Off button and while it is in selection step or if no other operation is performed approximately 2 minutes after the programme you selected has come to an end, your machine will automatically switch to energy saving mode. Brightness of indicator lights will decrease. Also, if your product is equipped with a display showing the programme duration, this display will completely turn off. In case of rotating the Programme Selection knob or pressing any button, lights and display will restore to their previous condition. Your selections made while exiting the energy saving mode may change. Check the appropriateness of your selections before starting the programme. Readjust if necessary. This is not a fault. 28 / EN Washing Machine / User's Manual