Beko WMB101433L User Manual - Page 29
PreparIng the machIne, 2 Programme selectIon, 3 AuxIlIary functIon selectIon, 4 StartIng
View all Beko WMB101433L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
6 Quick User Guide 6.1 Preparing the machine 1. Make sure that the hoses are connected tightly. 2. Plug in your machine. 3. Turn the tap on completely. 4. Place the laundry in the machine. 5. Add detergent and fabric softener. 6.2 Programme selection Select the programme suitable for the type, quantity and soiling degree of the laundry in accordance with the „Programme and consumption table" and the temperature table below. 6.3 Auxiliary function selection Use the following auxiliary functions according to your daily needs. Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme without pressing the Start / Pause button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel. If the auxiliary function cannot be selected or cancelled, light of the relevant auxiliary function will blink 3 times to warn the user. 6.4 Starting the programme 1. Press Start / Pause button to start the programme. 2. Programme follow-up light showing the startup of the programme will turn on. C If no programme is started or no key is pressed within 1 minute during programme selection process, the machine will switch to Pause mode and the illumination level of the temperature, speed and loading door indicator lights will decrease. Other indicator lights and indicators will turn off. Once the Programme Selection knob is rotated or any button is pressed, indicator lights and indicators will turn on again. 6.5 Cancelling the programme To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has been cancelled. Your machine will end the programme when you turn the Programme Selection knob; however, it does not drain the water inside. When you select and start a new programme, the newly selected programme will start depending on the step the previous programme was cancelled in. For example, it may take in additional water or continue to wash with the water inside. C Depending on the step where the programme was cancelled in, you may have to put detergent and softener again for the programme you have selected anew. Washing Machine / User's Manual 29 / EN