Beko WMC1471 User Manual - Page 26

Operating the product C Prewash without detergent is recommended for tulle and curtains. C Additional laundry may be loaded during the delayed start period. • Quicker Wash This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the number of rinsing steps for lightly soiled laundry. C When you select this function, load your machine with half of the maximum laundry specified in the programme table. Delayed Start (In some models only) With the Delayed Start function the startup of the programme may be delayed up to 3, 6 or 9 hours. C Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes. 1. Open the loading door, place the laundry and put detergent, etc. 2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. 3. Set the desired time by pressing the Delayed Start button. When the button is pressed once, 3 hours delayed start is selected. When the same button is pressed again, 6 hours delay is selected, and when it is pressed for the third time, 9 hours delayed start is selected. If you press the Delayed Start button once again, Delayed Start function will be canceled. 4. Press Start / Pause button. Previous delayed start time light turns off and next delayed start time light turns on after every 3 hours. 5. At the end of the countdown, all delayed start lights will turn off and the selected programme will start. Changing the Delayed Start period Press Delayed Start button. Every time the button is pressed, the period will change in 3-hour increments and the light of the selected delayed start time will turn on. Cancelling the Delayed Start function If you want to cancel the delayed start countdown and start the programme immediately: 1. Set the Delayed Start period to zero (all delayed start period lights will turn off) or turn the Programme Selection knob to any programme. Thus, Delayed Start function will be cancelled. The End/Cancel light flashes continuously. 2. Then, select the programme you want to run again. 3. Press Start / Pause button to start the programme. 5.11 Starting the programme 1. Press Start / Pause button to start the programme. 2. Programme follow-up light showing the startup of the programme will turn on. C If no programme is started or no key is pressed within 1 minute during programme selection process, the machine will switch to Pause mode and the illumination level of the temperature, speed and loading door indicator lights will decrease. Other indicator lights and indicators will turn off. Once the Programme Selection knob is rotated or any button is pressed, indicator lights and indicators will turn on again. 5.12 Child Lock Use child lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme. 26 / EN Washing Machine / User's Manual