Belkin F1DE101N F1DE101N Manual - Page 13

HARDWARE INSTALLATION (CONTINUED) Fig. 5 Serial 01 Reset CPU/ KVM Network Serial 02 Console CONNECTING THE KVM SWITCH TO THE UNIT Using the provided PS/2 KVM Cable Kit, connect one end of the VGA and PS/2 cables to the Console ports on the KVM switch. Connect the other end to the "CPU/KVM" ports on the back of the Unit (Fig. 5). bank select flash 1 23 4 reset console USB PS/2 daisy chain IN daisy chain OUT CPU 01/02 CPU 03/04 CPU 05/06 CPU 07/08 90-264 VAC. 47-63 Hz Fig. 6 Serial 01 Reset CPU/ KVM Network Serial 02 Console Fig. 5 CONNECTING THE UNIT TO THE NETWORK Connect the Unit to the network using RJ45 Category 5 network cable (Fig. 6). Serial 01 Reset CPU/ KVM Network Serial 02 Console Fig. 7 Fig.6 POWERING UP THE UNIT Attach the IEC power cable to the power connector located on the rear of the Unit (Fig. 7). 11