Belkin F1U119 F1U119 User Manual - Page 28
Printer Port Set to ECP or to Printer Port in Device Manager
View all Belkin F1U119 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
P73074/F1U119/AM/man.qxd 4/19/00 4:25 PM Page 24 Addendum: Disabling Bi-directional Communication for HP Printer (continued) Special Instructions for advanced users (only if you are still having problems printing): 1. "Printer Port Set to ECP" or to "Printer Port in Device Manager" • Boot Windows® 95/98 and right click on "My Computer" icon • Select "Properties" • Select "Device Manager" tab • Double-click on "Ports (Com & LPT)" • Double-click on "ECP Printer port" or "Printer Port (LPT1)." If your configuration is already "Printer Port," this correction does not apply • Select "Driver" tab • Select "Change Driver" • Select "Show all devices" • Under "Models:" Select "Printer port," then click "OK" • Click "OK" again • Shut down Windows® 95/98 and Reboot 2. Port Resource Settings Incorrect (e.g. Compaq PCs) • Right click on "My Computer" • Select "Properties" • Select "Device Manager" tab • Double-click "Ports (COM & LPT)" • Double-click "LPT" • Select "Resources" tab • De-select "Automatic Settings" • Change "Basic Configuration," find the configuration that meets the following conditions: • The settings need to be set for: Input/Output Range 0378-037F Input/Output Range 0778-077F • Interrupt Request 07 • NO DMA • Select "OK" • Shut down Windows® 95/98 and Reboot 24