Belkin F5D5231V4-SN-PD User Manual - Page 21
Step 2: Set your Computer's Network Settings to Work with a DHCP Server, Step 3: Configuring
View all Belkin F5D5231V4-SN-PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ALTERNATE SETUP METHOD 1.6 Before plugging the power cord into the Router, plug the cord into the wall, then plug the cord into the Router's power jack. Mac or PC computer that was originally connected to the cable or DSL modem To power adapter Supplied Ethernet cable (to computer) Cable or DSL modem Existing network cable (that came with modem) 1.7 Verify that your modem is connected to the Router by checking the lights on the front of the Router. The green light labeled "WAN" should be ON if your modem is connected correctly to the Router. If it is not, recheck your connections. 1.8 Verify that your computer is connected properly to the Router by checking the lights labeled "LAN 1,2,3,4". The light which corresponds to the numbered port connected to your computer should be ON, if your computer is connected properly. If it is not, recheck your connections. Step 2: Set your Computer's Network Settings to Work with a DHCP Server See the section in this manual called "Manually Configuring Network Settings" for directions. Step 3: Configuring the Router Using the Web-Based Advanced User Interface Using your Internet browser, you can access the Router's Web-Based Advanced 19