Belkin F5D5231V4-SN-PD User Manual - Page 63
Using DHCP next to Con
 |
View all Belkin F5D5231V4-SN-PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
MANUALLY CONFIGURING NETWORK SETTINGS 4. Select the "TCP/IP" tab (3). Next to "Configure" (4), you should see "Manually" or "Using DHCP". If you do not, check the PPPoE tab (5) to make sure that "Connect using PPPoE" is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password. 5. If "Manually" is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router. 6. If not already selected, select "Using DHCP" next to "Configure" (4), then click "Apply Now". Your network settings are now configured for use with the Router. 61
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58 -
59 -
60 -
61 -
62 -
63 -
64 -
65 -
66 -
67 -
68 -
69
-
70
-
71
-
72
 |
 |
61
4.
Select the “TCP/IP” tab
(3)
. Next to “Configure”
(4)
, you should see “Manually”
or “Using DHCP”. If you do not, check the PPPoE tab
(5)
to make sure that
“Connect using PPPoE” is NOT selected. If it is, you will need to configure your
Router for a PPPoE connection type using your user name and password.
5.
If “Manually” is selected, your Router will need to be set up for a static IP
connection type. Write the address information in the table below. You will need
to enter this information into the Router.
6.
If not already selected, select
“Using DHCP” next to “Configure”
(4)
, then click
“Apply Now”.
Your network settings are now configured for use with the Router.
MANUALLY CONFIGURING NETWORK SETTINGS