Belkin F5D8051 User Manual - Page 40
when computer has a built-in wired Ethernet card. - usb 2 0 n1 wireless adapter
View all Belkin F5D8051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
section Troubleshooting The Adapter does not perform or connection is unstable 1 when computer has a second built-in wireless network card (such as a mini PCI or Intel® Centrino™). 2 This condition occurs if your computer has a built-in wireless card while your Belkin N1 Wireless USB Adapter is also active. 3 This happens because Windows must now handle two active wireless connections. You must disable the built-in wireless card from your computer 4 under "Network Adapters" in the Device Manager. 5 The Adapter does not perform or connection is slow when computer has a built-in wired Ethernet card. 6 This condition occurs if your computer has an active Ethernet card while your Adapter is also active. This happens because Windows must now handle two active network connections. You must disable the Ethernet card from your computer under "Network Adapters" in the Device Manager. What's the difference between 802.11b, 802.11g, 802.11a, and draft 802.11n? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation for certifying network standards. The most common wireless networking standard, 802.11b, transmits information at 11Mbps; 802.11a and 802.11g work at 54Mbps; and draft 802.11n works at 108Mbps. See the following chart for more detailed information. 35