Belkin F5D92304 User Manual - Page 106
Manually Configuring Network Settings of this User Manual for an - lights
UPC - 722868562451
View all Belkin F5D92304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Troubleshooting troubleshooting screen does not open automatically, click on the "Troubleshoot" button in the lower, right-hand corner of the Setup Assistant window. 2. If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISP's domain may be at the end of the name. Example: "[email protected]". The "@myisp.com" part of the user name may need to be typed as well as your user name. If you continue to have no Internet connection, reference the section titled "Manually Configuring Network Settings" (page 88 of this User Manual) for an alternative setup method. Problem: • The Setup Assistant completed installation, but my web browser doesn't work. • I am unable to connect to the Internet. The "WAN" light on my Router is off, and the "Connected" light is blinking. Solution: If you cannot connect to the Internet, and the "WAN" light is off, and the "Connected" light is blinking, the problem may be that your modem and Router are not connected properly. 1. Make sure the network cable between the modem and the Router is connected. We strongly recommend using the cable that was supplied with your cable or DSL modem for this purpose. The cable should be connected at one end to the Router's "Internet/WAN" port, and at the other end to the network port on your modem. 2. Unplug the cable or DSL modem from its power source for three minutes. After three minutes, plug the modem back into its power source. This may force the modem to properly recognize the Router. 3. Unplug the power to your Router, wait 10 seconds, and then reconnect the power. This will cause the Router to reattempt communication with the modem. If the "WAN" light on the Router is not lit after completing these steps, please contact Belkin Technical Support. 4. Try shutting down and restarting your computer. Problem: • The Setup Assistant completed installation, but my web browser doesn't work. • I am unable to connect to the Internet. The "WAN" light on my Router is on, and the "Connected" light is blinking. 102