Belkin F6C110-RKM-2U Belkin OmniGuard Rackmount UPS Software Manual - Page 4
Installing the UPS, 2.1 Computer interface connection, CAUTION
View all Belkin F6C110-RKM-2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
OmniGuardTM UPS Power Management Software -Pentium Processor - 64 MB RAM - 10 GB Hard Disk 2. OmniGuardTM software requires one dedicated RS-232 serial port on your server, for communication with the UPS. 2.2 Installing the UPS Please refer to the Belkin OmniGuardTMRackmount UPS user manual. 2.2.1 Computer interface connection Connect the interface cable to a 9-pin computer interface port on the rear side of the UPS. Connect the other end of the cable to the server that will be monitoring/controlling the UPS. CAUTION! Connect the interface cable from the server to the 9-pin communication port on the rear panel of the UPS first, before set up the software. CAUTION! It is an option for the installation of software, UPS works fine without the installation of the software. 4