Belkin F6D3230-4 Quick Start Guide - Page 2

3. Check www The Easy Install Wizard software will verify your connections 3.1 Once you have completed connecting the Router, the Wizard will check the connection to the Router and then go on to determine what type of Internet connection you have. (click) Next 3.2 If you have a connection type that requires a user name and a password (from a high-speed carrier that may require you to log on to access the Internet), you may see this screen. The Wizard will ask you to type in your user name and password. After entering this information, click "Next". (click) Next Connect 5 3.3 The Wizard will now transfer all of the configuration information to the Router. This will take approximately one minute. During this time, do not turn off the Router or computer. The Router will restart itself at the end of this step. 3.4 The Wizard will now check for an Internet connection. This can take a few minutes. The Wizard may not detect a connection right away. If not, it will retry 10 times. The "Connected" light on the front panel of the Router will flash during this time. Please be patient through this process. Note: If the Easy Install Wizard repeatedly displays an error that it cannot make an Internet connection you may have to power cycle your modem in order to establish an Internet connection. This step will allow the modem to reconfigure itself properly to work with the router. Please follow the instructions below: Sequence: 1. Unplug the power from modem (supplied by your ISP). 2. Unplug the power from your Belkin router. 3. Wait for five minutes. 4. Reconnect power to the modem. 5. Wait for the modem to power up (about one minute, please refer to the modem's documentation). 6. Reconnect Power to the router. 7. Check your Internet connection. 3.5 When the Internet connection is complete, the Wizard will tell you that you are finished. The "Connected" LED on the front of the Router will be solid GREEN, indicating that the Router is now connected to the Internet. (click) Finish Begin surfing! Congratulations! You have finished installing your new Belkin Router. To test your Internet connection, open your browser and visit any website, such as www.belkin.com. Upon connecting to the Internet through your new Router for the first time, a reminder screen for our included Parental Control Web Content Filter will appear. It will reappear every six hours until you click one of the choices (see image below). Please refer to your "Parental Control Web Content Filter" User Manual for detailed information Updates Please visit http://www.belkin.com/networking for the latest software updates and technical information. If you have any further questions regarding installation of this product, please visit www.belkin.com/networking or contact: Belkin Tech Support US: 877.736.5771 310.898.1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Asia: 800 616 1790 Connect 5 Connect 6 Dual-Band Wireless A+G Router Dual-Band Wireless A+G Router Start Here www.belkin.com Belkin Tech Support US: 877.736.5771 310.898.1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 666 040 Belkin, Ltd. 7 Bowen Crescent, West Gosford NSW 2250 Australia Tel: +61 (0) 2 4372 8600 Fax: +61 (0) 2 4372 8603 Belkin Corporation 501 West Walnut Street Compton, CA 90220, USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components B.V. Starparc Building, Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components, Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac OS is a trademark of Apple Computer, Inc., registered in the U.S. and o ther countries. P74744 Quick Installation Guide ��� ���� �� F6D3230-4