Beltronics Express 926 Owner's Manual - Page 11

. Consider occupant safety when selecting a mounting location. Choose a location where the unit will not be hazardous in case of an accident. . For optimum detection, position your unit with a clear, unobstructed view of the road from the front and rear. . Do not allow the unit to make contact with the windshield. This will eliminate unnecessary vibration. . Avoid placing your unit in direct sunlight. During the summer, the interior of an enclosed vehicle can sometimes reach temperatures that will cause premature aging of the unit. . Your detector is not waterproof; exposure to water may cause damage. Dash Mounting . Select an area that is relatively level, clean and dry.Adhere the soft portion of the enclosed hook and loop fastener to this area and the corresponding hard portion to the bottom of your unit. . Fasten unit to dash by placing hook and loop pieces together. Mounting Brackets The visor bracket is fully assembled. To assemble the windshield bracket, follow this diagram. Visor Mounting . Remove the mounting bracket cover on top of the unit by pressing on the raised dots and pushing outward. Store the cover in a safe place. 