Beltronics Express 926 Owner's Manual - Page 5

. Antenna Opening: Radar and sws™ signals are received by a patented diecast antenna with integrated transition to microstrip mixer. . Laser Optical Sensors: collect Laser signals from in front and behind. . Audio Alert Speaker: all audible alerts and Digital Voice Messages are emitted from this location. . Power Jack: EXPRESS 926 and EXPRESS 916 operate in any vehicle with a 12 volt dc negative ground system (10.5 volt to 16 volt range). Note: EXPRESS 916 contains the same feature set as EXPRESS 926 pictured, except for city X/K/Ka and 60 sws™ Digital Voice Messages. description of features Power-Up Test Sequence Each time your unit is turned ,alerts for Laser,Ka,K,X and Safety Warning System® are presented.After this test sequence, illumination of digits 1, 2, 3 and/or 4 indicates if Selectable Features are engaged (see page 8). To bypass the power-up test sequence, press the ⁄ button again. If your unit presents an illumination pattern other than this standard power-up test sequence, return it to beltronics for servicing. Tutorial Mode The Tutorial mode allows you to become more familiar with all audible and visual alerts. To engage this mode, press and hold ,then press  when the unit is off. The unit will cycle continuously through audio/visual alerts for Laser, Ka, K, X and - Guard® Alert as well as sample sws™ messages or sws™ categories (EXPRESS 916). To exit tutorial mode, press the ⁄ button and your unit will be  and ready to receive signals. Memory Retention of Feature Selections Any time your unit is turned  or unplugged from the cigarette lighter socket, all feature settings are retained in the unit's memory. Memory retention eliminates the need to reset  your preferred feature settings each time your unit is turned off and then back .