Beltronics Vector 895 Owner's Manual - Page 8

17813_Vector895 Manual 3/21/05 8:18 AM Page 15 Overview of Programming Press the REVIEW button to go from one category to the next PILOT (Power-on indication) Pilot HWY Pilot H Press the CHANGE button to change your setting within a category * Full word: Highway or AutoScan or City Letter: H or A or C VOICE Voice ON Voice OFF * Voice alerts on Voice alerts off POWER-ON SEQUENCE PwrOn STD PwrOn FST * Standard power-on sequence Fast power-on sequence AUTOMUTE aMute ON aMute OFF * AutoMute on AutoMute off CITY MODE SENSITIVITY City STD City LoX City NoX * Standard City mode sensitivity Low X band sensitivity in City Mode No X band sensitivity in City Mode BANDS Bands DFT Bands MOD * Factory default settings Factory default settings modified * Factory Default Settings To reset your V895 to its original factory settings, press and hold the "CITY" and "BRT" buttons while turning the power on. The V895's display will provide a "Reset" message, accompanied by an audible alert, acknowledging the reset. Turn bands "ON" or "OFF" by pressing the VOLUME/MUTE button POP ON or OFF (default is off) SWS ON or OFF (default is off) 12 Details of Programming Pilot (Power-on indication) Note: When you are using the Dark mode, the display will only show HD, AD, or CD, (Highway-Dark, AutoScan-Dark, or CityDark). Pilot HWY (Full description) In this setting, your V895 will display "Highway," "City," or "AutoScan" as its power-on indication. (factory default) Pilot H (Letter) In this setting, your V895 will display "H" for Highway, "C" for City, and "A" for AutoScan. Voice Voice On (Voice announcements on) In this setting, all radar, laser, and SWS messages (if programmed) will be announced using a digital voice. Voice Off (Voice announcements off) In this setting, only the distinct audio tone will be heard when a radar, Laser, or SWS message is detected. Power-on Sequence PwrOnSTD (Standard) In this setting, each time you turn on your V895, it will display "BEL V895," "Laser," "Ka-band," "K-band," "X-band," "Safety," followed by a brief X-band alert. (factory default) If any bands have been changed from the factory default settings, a double X-band tone and corresponding message (i.e. "SWS ON"), will alert you that one or more bands have been changed. PwrOnFST (Fast power-on) In this setting, your V895 will provide a single X-band tone. If any bands have been changed from the factory default settings, a double X-band tone and corresponding message (i.e. "SWS ON"), will alert you that one or more bands have been changed. AutoMute aMute ON (AutoMute on) In this setting, your V895's audio alerts will initially be at the volume you set, but after a few seconds, the V895 will automatically reduce the volume level, to keep you informed, but not annoyed. (factory default) aMuteOFF (AutoMute off) With AutoMute off, your V895's audio alerts will remain at the volume you set for the duration of the radar encounter. 13