BenQ BenQ MW824ST Short-Throw 3D Network Projector User Manual: MX823ST, MW824
BenQ BenQ MW824ST Short-Throw 3D Network Projector Manual
View all BenQ BenQ MW824ST Short-Throw 3D Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ BenQ MW824ST Short-Throw 3D Network Projector manual content summary:
- BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 1
MX823ST/MW824ST Digital Projector User Manual - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 2
instructions 3 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 9 Controls and functions 10 Positioning your projector 49 Care of the projector 49 Lamp information 50 Troubleshooting......... 56 Specifications 57 Projector specifications 57 Dimensions 58 - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 3
the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 5. you operate your projector. your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 4
should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 5
it is not fully horizontal may cause a malfunction of, or damage to, the lamp. 3000 m (10000 feet) 0 m (0 feet) 16. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5 - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 6
. 18. Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 7
control allowing management of projector status from a computer using a web browser. • Crestron RoomView®, PJ Link and AMX supported The projector supports Crestron eControl and RoomView, and may vary within the lamp manufacturers specifications. This is normal and expected behavior. Introduction 7 - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 8
illustrated. *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector QDuigiictkalSPtraortjeGctuoidr e Quick start guide Power cord VGA cable User manual CD Warranty card* Remote control with batteries Optional accessories - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 9
Projector exterior view Front/upper side 1 2 3 5 6 4 7 8 9 10 Rear/lower side 12 13 14 15 16 17 18 19 20 21 11 24 26 25 23 22 - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 10
the of the lamp. Lights up lamp has developed a 11. problem. POWER Toggles the projector between standby mode and on. 3. MENU/EXIT Turns on the Down) Manually corrects distorted images resulting from an angled projection. 8. TEMP (Temperature) warning light Lights up red if the projector's - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 11
Fast-forward) Down) Goes to the previous file/Plays/Pauses/ Manually corrects distorted images Goes to the next file/Rewinds/Stops/Fast- resulting or reduces the projected picture size. 5. Left/ Decreases the projector volume. 6. MODE/ENTER Selects an available picture setup mode. - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 12
timings for the displayed image. The laser beam is visible. It is necessary to press and hold 16. Right/ LASER for continuous output. Increases the projector volume. When the On-Screen Display (OSD) menu Do not look into the laser light is activated, the #5, #3, and #16 keys are window or - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 13
sensor(s) on the projector that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the rear . • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 14
Set Rear Ceiling in the SYSTEM SETUP: Basic > Projector Installation menu after you turn the projector on. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase the BenQ Projector Ceiling Mount Kit from your dealer to mount - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 15
image size. Projection dimensions Refer to "Dimensions" on page 58 for the center of lens dimensions of this projector before calculating the appropriate position. MX823ST (a) Screen Center of lens (c) (b) The screen aspect ratio is 4:3 and the projected picture is 4:3 (a) Screen size Diagonal - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 16
. All measurements are approximate and may vary from the actual sizes. BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 17
each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • The connection illustrations below are for reference only. The - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 18
might be expected in home theater or home cinema applications. The built-in speaker(s) will be muted when the AUDIO-OUT jack is connected. • The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting audio" on page 18 for details. • If the - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 19
detailed information. Using a HDMI to Micro USB cable 1. Take a HDMI to Micro USB cable and connect one end to the HDMI input connector on the projector. 2. Connect the other end to the Micro USB output socket on your smart device. 3. Switch to the HDMI/MHL input source. To switch input signal - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 20
, it will run the cooling fan for approximately 90 seconds before energizing the lamp. 3. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 4. If you are prompted for a password, press the arrow keys to enter a six-digit password. See - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 21
air comes from. Auto-adjusting the image In some cases, you may need to optimize the picture quality. To do this, press AUTO on the projector or remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust the values of Frequency and Clock to provide the best - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 22
projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, follow ONE of these steps: • Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 23
Operation Settings Remote Receiver Panel Key Lock Background Color Splash Screen Front Table Front+Rear Off BenQ BenQ SYSTEM SETUP: Basic Presentation Timer Language Projector Installation Menu Settings Operation Settings Remote Receiver Panel Key Lock Background Color Splash Screen ENTER Front - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 24
Lock function is activated, you have to enter the correct password to turn on the projector. IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 25
down the recall code, and contact BenQ Customer Center. projector. Recall Code: 3. Seek help from the local BenQ service center to decode the number. You as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 26
brighter than "Video" using mostly moving images (movies). HDMI/MHL Video S-Video Network Display • The native display resolution of this projector is in a 4:3 (MX823ST)/16:10 (MW824ST) aspect ratio. For best display picture results, you should select and use an input signal which outputs at this - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 27
the center of the picture. Press the key repeatedly until the picture size is suitable for your need. 2. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 3. To restore the picture to its original size, press AUTO. You can also press ZOOM. When the key - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 28
black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width. This is suitable the screen without altering the image's aspect ratio. 15:9 picture MX823ST MW824ST 2. Real: The image is projected as its original resolution, - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 29
picture type. To select an operation mode that suits your need, you can follow one of the following steps. • Press MODE/ENTER on the projector or remote control repeatedly until your desired mode is selected. • Go to the PICTURE > Picture Mode menu and press / to select a desired mode. 1. Dynamic - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 30
vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. When - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 31
preference. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc, you can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments. To adjust the - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 32
Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected picture will be selected. Increasing its range will include red close to yellow and red close to magenta. 5. Press to - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 33
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message "Timer is Off" displaying on the screen. Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connection" on page 17 for details. You can operate your - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 34
is between 0°C-30°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: 1. Press MENU/EXIT and then press - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 35
On. If available, you can also press MUTE on the remote control to toggle projector audio between on and off. Adjusting the sound level To adjust the sound level, affect the Power On/Off Ring Tone. Using the test pattern The projector is able to display the grid test pattern. It helps you adjust - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 36
Using the teaching templates The projector provides several preset patterns for various teaching purposes. To activate the pattern: 1. Open the OSD menu and go to the DISPLAY > Teaching Template menu and - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 37
flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. To protect the lamp, the projector will not respond to any commands during the cooling process. To shorten the cooling time, you can also activate the Quick - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 38
Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options 1. DISPLAY 2. PICTURE 3. SOURCE Wall Color Off/Light Yellow/Pink/Light Green/Blue/ Blackboard Aspect Ratio - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 39
Down/Count Up Sound Reminder On/Off On/Off Language 4. SYSTEM SETUP: Basic Projector Installation Front Table/Rear Table/Rear Ceiling/ Front Ceiling Menu Display Time 5 sec/ /Rear Panel Key Lock On/Off Background Color BenQ/Black/Blue/Purple Splash Screen BenQ/Black/Blue Operation 39 - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 40
• Picture Mode • Lamp Mode Current System Status • Resolution • 3D Format • Color System • Equivalent Lamp • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 41
1. DISPLAY menu Description of each menu Function Wall Color Aspect Ratio Keystone Position Phase Description Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color" on page 29 for details. There are several options to set the image's aspect ratio - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 42
the inversion of the image depth, enable this function to correct the problem. Apply 3D Settings After the 3D settings are saved, you can decide a set of 3D settings that you have saved. Once applied, the projector will automatically play the incoming 3D contents if it matches the 3D settings - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 43
Description Picture Mode Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 29 for details. Selects a picture mode that best - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 44
Space" on page 26 for details. Presentation Timer Language Projector Installation Menu Settings Reminds the presenter to finish the Display (OSD) menus. See "Using the menus" on page 23 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 45
"Hiding the image" on page 34 for details. Sleep Timer Sets the auto-shutdown timer. Allows you to enable all the remote receivers or one specific remote receiver on the projector. Panel Key Lock Background Color Splash Screen Disables or enables all panel key functions except POWER on the - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 46
baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. See "Using the test pattern" on page 35 for details. Closed Caption Enable - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 47
connected MHL compatible smart device as long as the power is fed to the projector. Wired LAN See BenQ Network Projector Operation Guide for details. AMX Device Discovery When AMX Device Discovery is On, the projector can be detected by AMX controller. MAC Address Displays the mac address of this - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 48
System Shows input system format. Equivalent Lamp Displays the number of hours the lamp has been used. Firmware Version Shows the firmware version of your projector. 48 Operation - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 49
the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 57 or consult - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 50
. To keep the lamp life as long as possible, you can do the following settings via the OSD menu. • Setting the Lamp Mode Setting the projector in Economic, SmartEco, LampSave or LumenCare mode extends the lamp operation life. To set Economic, SmartEco, LampSave or LumenCare mode, go into the SYSTEM - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 51
>XXXX Hours Lamp usage time exceeded Order a new lamp at lamp.benq.com OK The lamp MUST be replaced before the projector will operate normally. Press MODE/ENTER to dismiss the message. WARNING Out of Lamp Usage Time Replace lamp (refer to User Manual) Then reset lamp timer Order a new lamp at lamp - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 52
that you use respirators, safety glasses, goggles or face shield and wear protective clothing such as gloves. 1. Turn the power off and disconnect the projector from the power outlet. If the lamp is hot, avoid burns by waiting for approximately 45 minutes until the lamp has cooled. 2. Loosen the - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 53
the lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 54
cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 14. Connect the power and restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 15. After the startup logo, open the On-Screen Display - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 55
Indicators Light Status & Description Orange Green Flashing Green Orange Flashing Red Green Red Flashing Off Off Green Green Off Off Off Off Off Off Off Red Green Off Green Off Off Off Off Red Red Red Green Green Green Green Green Flashing Green Flashing Green Flashing Green Flashing Red - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 56
Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the cooling process. Plug the power cord into the AC power jack on the projector, and plug the power cord into the power outlet. If the power - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 57
Specifications Projector specifications All specifications are subject to change without notice. Optical Control Resolution (MX823ST) 1024 x 768 XGA (MW824ST) 1280 x 800 WXGA Display system 1-CHIP DMD RS-232 serial control 9 pin x 1 LAN control RJ45 x 1 IR receiver x 2 USB port (Mini-B x 1) - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 58
Dimensions 232.6 114.4 Ceiling mount installation Ceiling Mount screw: M4 (Max L = 25 mm; Min L = 20 mm) 287.3 62 62 Unit: mm 77 175.95 127.7 84.021 8 199.613 677.3 577.694 538.102 25 137.494 58 Specifications Unit: mm - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 59
floor to bottom f 900 900 900 900 900 900 900 of image (mm) Distance from screen surface to a 790 950 790 970 970 780 950 projector rear case (mm) Distance from top case to the top of b image (mm) 94 124 94 126 126 92 124 Distance from top of wall - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 60
1171 1181 Image Width (mm) W 1874 1874 1887 Distance from floor to bottom of image (mm) f 900 900 900 Distance from screen surface to projector lens (mm) a 916 916 926 Distance from top case to the top of image (mm) b 6.8 6.8 7.5 Distance from top of wall mount to ceiling (mm - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 61
BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector guide only and may differ depending on several factors relating to any specific installation. • The dimensions are based on the projector - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 62
.000 1152 x 870@75Hz MAC21 75.060 68.680 100.000 • *Supported timing for 3D signal in Frame Sequential, Top Bottom and Side by Side formats. **Supported timing for 3D signal in Frame Sequential format. ***Supported timing for 3D signal in Top Bottom and Side by Side formats. 62 Specifications - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 63
x 600@65Hz BenQ Notebook Timing BenQ Notebook Timing 60. Supported timing for 3D signal in Frame Sequential, Top Bottom and Side by Side formats. **Supported timing for 3D signal in Frame Sequential format. ***Supported timing for 3D signal in Top Bottom and Side by Side formats. Specifications - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 64
Top Bottom, Frame Packing and Side by Side formats. ****Supported timing for 3D signal in Side by Side format. *****Supported timing for 3D signal in Top Bottom format. Supported timing for MHL input Timing 480i 480p 576i 576p 720/50p MHL MHL MHL MHL MHL MHL MHL MHL MHL MHL MHL 64 Specifications - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 65
Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC* PAL SECAM PAL-M PAL-N PAL 25 or 4.41 3.58 3.58 4.43 4.43 *Supported timing for 3D signal with Frame Sequential format. Specifications 65 - BenQ BenQ MW824ST Short-Throw 3D Network Projector | User Manual: MX823ST, MW824 - Page 66
product in accordance with BenQ's written instructions, especially the ambient humidity must be inbetween 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector in a dusty environment. This warranty gives you specific legal rights, and
MX823ST/MW824ST
Digital Projector
User Manual