BenQ BenQ MW824ST Short-Throw 3D Network Projector User Manual: MX823ST, MW824 - Page 47
Function, Description, Standby, Settings, Network, Reset All, SYSTEM SETUP: Advanced menu, Monitor Out
View all BenQ BenQ MW824ST Short-Throw 3D Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5. SYSTEM SETUP: Advanced menu Function Standby Settings Network Settings Reset All Settings Description Network Selecting On enables the function. The projector is able to provide the network function when it is in standby mode. Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER-1 jack is correctly connected to devices. See "Connection" on page 17 for how to make the connection. Audio Pass Through The projector can play sound when it is in standby mode and the corresponding jacks are correctly connected to devices. Press / to choose the source that you wish to use. See "Connection" on page 17 for how to make the connection. Enabling this function slightly increases the standby power consumption. MHL Charging Selecting On enables the function. The projector will automatically charge the connected MHL compatible smart device as long as the power is fed to the projector. Wired LAN See BenQ Network Projector Operation Guide for details. AMX Device Discovery When AMX Device Discovery is On, the projector can be detected by AMX controller. MAC Address Displays the mac address of this projector. Returns all settings to the factory preset values. The following settings will still remain: Keystone, Phase, H. Size, User 1, User 2, Reference Mode, Color Space Conversion, Language, Projector Installation, High Altitude Mode, Security Settings, Network Settings and Baud Rate. Operation 47