BenQ BenQ MW824ST Short-Throw 3D Network Projector User Manual: MX823ST, MW824 - Page 40
Main menu, Sub-menu, Options, SYSTEM, SETUP, Advanced, INFORMA, Reset Lamp Timer
![]() |
View all BenQ BenQ MW824ST Short-Throw 3D Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Main menu Sub-menu Options 5. SYSTEM SETUP: Advanced 6. INFORMA TION High Altitude Mode On/Off Mute On/Off Audio Settings Volume Power On/Off Ring Tone On/Off Lamp Settings Lamp Mode Normal/Economic/SmartEco/ LampSave/LumenCare Reset Lamp Timer Equivalent Lamp Security Settings Change Password Change Security Settings Power On Lock Baud Rate 2400/4800/9600/14400/19200/ 38400/57600/115200 Test Pattern On/Off Closed Caption Closed Caption Enable On/Off Caption Version CC1/CC2/CC3/CC4 Network On/Off Standby Settings Monitor Out Audio Pass Through On/Off Off/Audio in 1/Audio in 2/Audio L/ R/HDMI/MHL MHL Charging On/Off Status DHCP IP Address Wired LAN Subnet Mask Network Default Gateway Settings DNS Server Apply AMX Device Discovery On/Off MAC Address Reset All Settings • Source • Picture Mode • Lamp Mode Current System Status • Resolution • 3D Format • Color System • Equivalent Lamp • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. 40 Operation
![](/manual_guide/products/benq-mw824st-user-manual-mx823st-mw824st-129e51f/40.png)