BenQ EW2770QZ User Manual - Page 14
Connect the headphones., Connect the power cable to the monitor., Connect-to and turn-on the power.
View all BenQ EW2770QZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
To Connect the DP Cable Or Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. After the monitor and the computer are powered on, if the image is not displayed, disconnect the DP cable. Connect the monitor to any video source other than DP first. Go to System and DisplayPort on the OSD menu of the monitor and change the setting from 1.2 to 1.1. Once the setting is done, unplug the current video cable and re-connect the DP cable. To go to the OSD menu, see Basic menu operation on page 24. The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region. 3. Connect the headphones. You may connect headphones to the headphone jack found next to the Line In jack of the monitor. 4. Connect the power cable to the monitor. Plug one end of the power cord into the socket labelled on the rear of the monitor. Do not connect the other end to a power outlet just yet. 5. Connect-to and turn-on the power. Plug the other end of the power cord into a power outlet and turn it on. Picture may differ from product supplied for your region. 14 How to assemble your monitor hardware