BenQ LW61ST - PRJ Networking Operation Guide - Page 22

3. On your computer, make sure QPresenter is downloaded and installed. See "Downloading QPresenter" on page 7 and "Installing QPresenter" on page 7 for detail. 4. Open QPresenter by clicking the icon. 5. Go to Settings > Advanced Settings. 6. Click Yes in the Activate Broadcasting row. 7. Select the same channel in the drop- down list and click Apply. Using the USB cable to display computer content (for selective models) 1. Take a USB cable and connect one end to your computer and the other end to the USB mini B port on the projector. 2. Press SOURCE and select USB Display in the source bar. 3. Go to My Computer on you PC and double-click the BenQ QPresenter icon. 4. The projector automatically displays the content in your computer. Supported Resolutions The projected computer screen will be automatically rescaled to 1024 x 768. Using the Projection Login Code This function is designed to ensure network display through the correct projector. To toggle this function: 1. Go to the SYSTEM SETUP: Advanced > Network Settings menu after opening the OSD menu system. Press MODE/ENTER. 2. Press to highlight Projection Log In Code and press / to select On or Off. When this function is on, the projector generates a random 4-digit code in the upper right corner when you switch the source to Network Display. You need to key in this 4-digit code in the QPresenter when connecting to the projector. 22 Projecting computer screen contents