BenQ MP522 User Manual - Page 44

4. SYSTEM SETUP: Basic menu FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Projector Position (Front Table) The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 13 for details. Auto Power Off (Disable) Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off " on page 48 for details. Blank Timer (Disable) Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 37 for details. Panel Key Lock (Off) Disables or enables all panel key functions except II Power on the projector and keys on the remote control. See "Locking control keys" on page 37 for details. Sleep Timer Sets the auto-shutdown timer. The timer can be set to a value between (Disable) 30 minutes and 12 hours. Splash Screen (BenQ logo) Allows you to select which logo screen will display during projector start-up. Three options are available: BenQ logo, Black screen, or Blue screen. Quick Cooling (On) High Altitude Mode (Off) Selecting On enables the function and the projector cooling time will be shortened to a few seconds. If you attempt to restart the projector right after the quick cooling process, it may not be turned on successfully and will rerun its cooling fans. A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 38 for details. Menu Settings Menu display time (15 sec) Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu position (Center) Sets the On-Screen Display (OSD) menu position. 5. SYSTEM SETUP: Advanced menu 44 Operation