BenQ MW612 User Manual - Page 35

To obtain the lamp hour information: 1. Go to Advanced Menu - Settings > Lamp Settings and press OK. The Lamp Settings page appears. 2. Press to select Lamp Timer and press OK. The Lamp Timer information is displayed. You can also get the lamp hour information on the Information menu. Extending lamp life • Setting the Lamp Mode Go to Advanced Menu - Settings > Lamp Settings > Lamp Mode and select a suitable lamp power from among the provided modes. Setting the projector in Economic, SmartEco or LampSave mode extends lamp life. Lamp mode Normal Economic SmartEco LampSave Description Provides full lamp brightness Lowers brightness to extend the lamp life and decreases the fan noise Adjusts the lamp power automatically depending on the content brightness level while optimizing display quality Adjusts the lamp power automatically depending on the content brightness level while offering a longer lamp life • Setting Auto Power Off This function allows the projector to turn off automatically if no input signal is detected after a set period of time to prevent unnecessary waste of lamp life. To set Auto Power Off, go to Advanced Menu - Settings > Power On/Off Settings > Auto Power Off and press / . Timing of replacing the lamp When the Lamp indicator lights up or a message appears suggesting it is time to replace the lamp, please consult your dealer or go to http://www.BenQ.com before installing a new lamp. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. • The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to projection distance. • The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is normal and expected behavior. • The LAMP indicator light and TEMPerature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer. See Indicators on page 39. The following Lamp warning displays will remind you to change the lamp. Notice Order a replacement lamp Equivalent lamp hour >XXXX hours Order a new lamp at www.BenQ.com Install a new lamp for optimal performance. Press OK to dismiss the message. Maintenance 35