BenQ MX522 User Manual for MS521, MX522, MW523 - Page 13
Up/Down, Source, Freeze, Teaching Template, 3D setting
View all BenQ MX522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
14. Source 19. CC Displays the source selection bar. See Display the video term description on "Switching input signal" on page 32 for screen which is provided for hard-of- details. hearing viewers. 15. Volume +/- 20. Test Adjusts the sound level. See "Adjusting Displays the test pattern. See "Use build-in the sound" on page 42 for details. test pattern" on page 26 for details. 16. Page Up/Down 21. Teaching Template Page up/down arrows when connected Displays the selectable bar for teachers through USB to a PC. See "Remote choosing the template as his/her suitable paging operations" on page 40 for teaching background. See "Use Teaching details. Template" on page 43 for details. 17. Mute 22. 3D setting Toggles projector audio between on and Activates the 3D On-Screen off. Display (OSD) menu item. 18. Freeze Freezes the projected image. See "Freezing the image" on page 41 for details. Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 15 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. • Operating the projector from the front Approx. 15° Introduction 13