BenQ P211 User Manual - Page 16
Connecting the Signal Cable
View all BenQ P211 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing the Monitor Connecting the Signal Cable Your Benq P211 provides both D-SUB and BNC signal connectors.The D-SUB or BNC signals can automatically be detected by its microprocessor. ✏ Connecting through D-SUB signal connector 1) Make sure that the system power is turned off. 2) Connect the computer end of the D-SUB cable to the 15-pin output connector on the video board of your computer. 3) Connect the monitor end of the D-SUB cable to the D-SUB receptacle on the back of the monitor. 5
±
5
Connecting the Signal Cable
Your Benq P211 provides both D-SUB and BNC signal connectors. The D-SUB or
BNC signals can automatically be detected by its microprocessor.
Connecting through D-SUB signal connector
1)
Make sure that the system power is turned off.
2)
Connect the computer end of the D-SUB cable to the 15-pin output connector
on the video board of your computer.
3)
Connect the monitor end of the D-SUB cable to the D-SUB receptacle on the
back of the monitor.
Installing the Monitor