BenQ PB7200 User Manual - Page 8
External Control Panel - manual
View all BenQ PB7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
BenQ PB7200/ PB7220/ PB7100 User's Manual External Control Panel 1 Power Presses the Power key to turn the projector on or off. 2 Source Selects signal sources from among RGB1, RGB-2, YPbPr, S-Video and Video. 3 Left 4 Exit 5 Right 6 Menu Menu will display the menu system on screen. Press Menu again to access the sub-menus. Left and Right help you navigate among choices and settings in the menus and sub-menus. However, when the on-screen menu is not activated, the Left and Right buttons will function as Keystone -/+ hot keys. Press the Exit button to go back to the main menu. Press Exit again to leave the menu system. 7 Auto Automatically determines the best picture settings for current received signals. 8 Blank Uses Blank to hide the screen image. You can unseal the image gradually by using the mouse of the remote control, or simply press Blank to turn on the image immediately. 9 Power indicator It will light up or flash when the projector is under operation. 10 Temp indicator The Temp indicator will flash when the system temperature is too high, which may occur if the projector is operated improperly. See "Temp Information" on page 24 for more detailed information. 11 Lamp indicator The Lamp Indicator will light up when the lamp needs service or replacement. See "Lamp Information" on page 22 for more detailed information. 4 Introduction