BenQ PB7220 User Manual - Page 33
Status Messages
UPC - 840046004316
View all BenQ PB7220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
BenQ PB7200/ PB7220/ PB7100 User's Manual REMOTE CONTROL DOES NOT WORK Try these solutions: • Replace the batteries with new ones. • Make sure there is no obstacle between the remote control and the projector. • Stand within 6 meters (19.5 feet) of the projector. • Make sure nothing is blocking the front and rear receivers. Status Messages On-Screen Messages SEARCHING ACQUIRING SIGNAL OUT OF RANGE LAMP WARNING CHANGE LAMP AND RESET LAMP TIMER! OUT OF LAMP USAGE TIME. YOU HAVE TO CHANGE THE LAMP! OUT OF LAMP USAGE TIME. CHANGE THE LAMP! Description Projector is searching for input. Projector has identified the input signal and is running the auto image adjustment function. Input signal frequency exceeds the projector's range. The lamp has been in operation for 1900 hours. Install a new lamp for optimal performance. The lamp has been in operation for 1980 hours, and the power will turn off after 20 hours. The lamp has been in operation for over 2000 hours. The warning message will display for 30 seconds every 5 minutes after you turn on the projector and the power will turn off automatically after 10 minutes. Troubleshooting 29