BenQ PB8263 User Manual - Page 14

Remote control 2. 12 1 13 2 14 3. 3 15 4 5 6 16 4. 7 6 8 4 17 9 18 5. 10 19 6. 11 20 7. 1. I Power Toggles the projector between standby mode and on. When the projector is in standby mode, press once to turn the projector on. 8. When the projector is on, press twice to turn the projector to standby. See "Start up" on page 30 and "Shutting down the projector" on page 40 for details. ASPECT Selects an image aspect ratio to suit the input signal. See "Selecting a preset mode" on page 35 for details. SOURCE Sequentially selects the input signal Analog RGB, DVI-A, DVI-D, Analog YPbPr, S-Video, or Composite Video. See "Switching input signal" on page 31 for details. UP, DOWN When the On-Screen Display (OSD) is activated, press UP to exit and save the menu settings. Press DOWN to open the OSD menu and move the selection focus up and down. See "Using the menus" on page 42 for details. MUTE Toggles the projector audio between on and off. Left, Right Correct keystoning at the top or bottom of the projected image. When the on-screen menu is activated, moves the selection focus left or right, or make adjustments. See "Correcting keystone" on page 34 and "Using the menus" on page 42 for details. AUTO Automatically determines the best picture settings for the displayed image. See "Auto-adjusting the image" on page 32 for details. MENU Turns the On-Screen Display (OSD) menu on. Exits and saves the menu settings. See "Using the menus" on page 42 for details. 14 Introduction