Home » BenQ Manuals » Projectors » BenQ SL703S » Manual Viewer

BenQ SL703S User Guide - Page 29

Status Messages

UPC - 750519056141

Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Benq Corporation Status Messages On Screen Messages SEARCHING INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE SYNC IS OUT OF RANGE CHANGE THE LAMP, AND RESET THE LAMP TIMER CHANGE THE LAMP, THE POWER WILL TURN OFF AFTER 20 HOURS CHANGE THE LAMP! Description Projector is searching for input. Projector has identified the input signal and is running the auto image adjustment function. Input signal frequency exceeds the projector's. The lamp has been in operation for 1200 hours. Lamp replacement is recommended. The lamp has been in operation for 1480 hours, and the power will turn off after 20 more hours. Replace the lamp as soon as possible. The lamp has been in operation for over 1500 hours, and the power will turn off automatically in 10 minutes. Replace the lamp immediately. 24 Troubleshooting

Section	Page
DLP Projector	1
SL 703S	1
Features	1
1. High Brightness	1
2. High Resolution	1
3. Compact Size, Feather Weight for Portability	1
4. Durable Magnesium Alloy Body	1
5. RGB Output Terminal	1
6. One Touch Auto-Adjustment Function	1
7. Easy Keystone Adjustment	1
Fill this in!!	2
Introduction 1	4
Installation 10	4
Operation 11	4
Maintenance 19	4
Troubleshooting 23	5
Specifications 25	5
Dimensions 27	5
Introduction	6
Safety Instructions	6
1. Read this user’s guide before you operate your projector and save it for future reference.	6
2. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately...	6
3. Never replace lamp assembly or any electronic components unless the projector is unplugged.	6
4. To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualifie...	6
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing ...	6
6. This product is capable of displaying inverted images for ceiling mount installation. Please u...	6
7. To prevent lamps from bursting, change the lamp after changing the mounting position of projec...	6
Warranty	7
Limited Warranty	7
Shipping Contents	8
Optional Accessories	8
1. Spare lamp kit	8
2. Macintosh Adaptor	8
Projector Description	9
Projector	9
1. External control panel (see next page)	9
2. Projection lens	9
3. Front adjustment feet	9
4. IR remote sensor	9
5. Ventilation grill	9
6. Kensington lock	9
7. AC power cord input	9
8. S-video connector	9
9. Video connector	9
10. D-sub connector (for computer/ HDTV input)	9
11. Audio input	9
12. Rear adjustment feet	9
13. Lamp access door (underneath unit)	9
External Control Panel	10
Adjuster	11
1. Lift the projector up and press the adjuster button to release the adjuster.	11
2. The adjuster will drop into position and be locked.	11
Projector Features	11
Remote Control Description	12
Remote Control Features	12
FREEZE	13
Installing or Replacing Batteries	14
Installation	15
Screen Size	15
Connecting to Various Equipment	15
Operation	16
Start Up	16
1. Plug the power cord into a wall socket.	16
2. Press POWER for 1 second.	16
3. Switch on all connected equipment.	16
Digital Keystone Correction	17
Auto Adjustment	17
Source Selection	18
Menu System	18
1. Display Menu	19
2. Image Menu	20
3. Source Menu	21
1. Default	21
2. Ceiling - mounted projection	21
3. Rear screen projection	21
4. Ceiling - mounted and rear screen projection	21
4.Control Menu	22
5. PIP Menu	22
Shutdown	23
1. Press POWER and a warning message will prompt up. To turn off the projector, Press POWER again.	23
2. The fan will continue to run for approximately 60 seconds.	23
3. Disconnect the power cord from the wall socket.	23
Maintenance	24
Lamp Information	24
Use and Replacement of Lamp	24
LED Status Indicators	24
Lamp Replacement	24
1. Press the POWER button to switch off the projector. Disconnect the power cord from the outlet ...	25
2. Loosen the screw and remove the lamp cover. If the lamp is hot, avoid burns by waiting 45 minu...	25
3. Loosen the 3 screws. (It is strongly recommended you use a magnetic-headed screwdriver.) Pull ...	25
4. Replace the lamp with a new one. Insert it into the projector, and tighten the screws firmly. ...	25
5. Re-install the lamp cover and tighten the screw. Do not turn on the power with the lamp cover ...	25
Resetting Lamp Hours	26
OSD	26
FUNCTION	26
Service Information	27
Accessories (Included in the standard package)	27
Optional Accessories (Not Included in the standard package)	27
Ordering Parts or Getting Information	27
Troubleshooting	28
Status Messages	29
Specifications	30
Projector Specifications	30
Technical Specifications	30
Timing Chart	31
Resolution	31
H Sync (kHz)	31
V Sync (Hz)	31
Remark	31
640x350	31
31.5	31
70.1	31
640x400	31
37.9	31
85.1	31
VESA	31
720x400	31
31.5	31
70.0	31
720x400	31
37.9	31
85.1	31
VESA	31
640x480	31
31.5	31
60.0	31
VESA	31
640x480	31
37.9	31
72.8	31
VESA	31
640x480	31
35.0	31
66.7	31
Macintosh	31
640x480	31
43.3	31
85.0	31
VESA	31
800x600	31
35.2	31
56.3	31
VESA	31
800x600	31
37.9	31
60.3	31
VESA	31
800x600	31
46.9	31
75.0	31
VESA	31
800x600	31
48.1	31
72.2	31
VESA	31
800x600	31
53.7	31
85.1	31
VESA	31
832x624	31
49.7	31
74.5	31
Macintosh	31
1024x768	31
48.4	31
60.0	31
VESA	31
1024x768	31
56.5	31
70.1	31
VESA	31
1024x768	31
60.0	31
75.0	31
VESA	31
1024x768	31
68.7	31
85.0	31
VESA	31
1280x1024	31
64.0	31
60.0	31
VESA	31