BenQ TK800 User Manual - Page 10

10. MODE, PIC MODE 18. Selects an available picture setup mode. Toggles projector audio between on and off. 11. LIGHT Turns on the remote control backlight for a few seconds. To keep the backlight on, press any other key while the backlight is on. Press 19. Volume keys / Decrease or increase the projector volume. 20. HDMI CEC-compatible device control keys the key again to turn the backlight off. ( Backward, Pause, Forward, 12. 3D Rewind, Play, Fast forward, Stop) Displays the 3D menu. 13. LIGHT MODE Goes to the previous file/Pauses/Goes to the next file/Rewinds/Plays/Fast-forwards/Stops during media playback. Only available when Selects a suitable lamp power from among the controlling your HDMI CEC-compatible provided modes. devices. 14. DYNAMIC IRIS 21. SOUND MODE The function is not available with this model. Displays the Sound Mode menu. 15. Keystone correction key Displays the Keystone correction menu. 16. HDR Displays the HDR menu. 22. Picture quality adjustment keys (BRIGHT, CONTRAST, SHARP, COLOR TEMP, COLOR MANAGE, GAMMA) Display the setting bars for adjustments of the appropriate picture quality values. 17. CINEMAMASTER, DETAIL ENHANCER, LUMI EXPERT The functions are not available with this model. Remote control effective range The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor(s) to function correctly. The distance between the remote control and the sensor(s) should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor(s) on the projector that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the top Approx. +30º Approx. +30º 10 Introduction