BenQ TL650 Large Display User Manual - Page 18
Connecting audio/video signals, Connecting the VGA input
View all BenQ TL650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 Setting up the display Connecting audio/video signals Pay attention to the following notes when you connect cables: • Please turn off all devices. • Familiarize yourself with the audio/video ports on the display and the devices you want to use. Be aware that incorrect connections may adversely affect picture quality. • Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the connectors at the end of the cable. • Ensure that all cables are fully inserted and firmly seated. Connecting the VGA input 1. Connect the VGA IN jack on the display to the VGA output jack on a computer using a D-Sub (15-pin) cable. 2. Connect the computer's audio output jack to the AUDIO IN (AUDIO1) jack on the display using a suitable audio cable. 3. If a second display is used, connect the VGA OUT jack on the first display to the VGA IN jack on the second display using a D-Sub (15-pin) cable. This relays the VGA input signal from the first display to the second one.