BenQ TL650 Large Display User Manual - Page 39
OSD Info Box, Reset User Default
View all BenQ TL650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
The OSD (On-Screen Display) menu 39 Power Save Sets the display to enter the power saving mode when there is no signal detected. • Eco: All source can enter the power saving mode, but only a VGA signal can wake up the display or you have to press the power button to wake up the display when other source is connected. • Standard: All source can enter the power saving mode and wake up the display. • Off: If no source is detected, the backlight will continue on. • VGA Only: Only the VGA signal can enter the power saving mode and wake up the display. Serial can bring any mode out of the power savings. Set Monitor Assigns an ID number for the current display when multiple displays are ID connected. Image Automatically displays swift moving patterns every 10 seconds to prevent image Retention retention on the screen. Auto Automatically optimizes image display for the VGA input. Adjustment Advanced • Reset User Default: Resets all OSD settings (except the Language setting) to the factory settings. • OSD Info Box: When turned ON, the display will always show the current input source and resolution onscreen. Select OFF to show the information box onscreen only when you press INFO on the remote control. • Status - Thermal: Shows current temperature inside the display. - Ambient Light: Shows current ambient brightness around the display. - 5V Detect: Shows the current 5V voltage detection result. - 12V Detect: Shows the current 12V voltage detection result. - Operating Time: Shows the time elapsed since the display was last turned on. D=Day, H=Hour. - FW Version: Shows the current firmware version. - Input Source: Shows the current input source and its resolution.