Beretta A400 Xcel Sporting Beretta GUNPOD Instructions - Page 2

Access To The Functions - model

Get Beretta A400 Xcel Sporting PDF manuals and user guides View all Beretta A400 Xcel Sporting manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

THIS INSTRUCTION SHEET MUST ALWAYS ACCOMPANY THE FIREARM, ALSO IN THE CASE THE FIREARM IS SOLD TO ANOTHER PERSON. CAUTION: Before handling the GunPod ensure that the firearm is not loaded, that there are no cartridges in the magazine, receiver and chamber. Inspect the firearm by looking through the ejection port, the loading gate and the chamber. gun, if its design allows housing a GunPod. In this case, the black polymer insert is located on the cap (the bottom part of the grip), with the words "Ready for GunPod" clearly visible. CAUTION: Request the assistance of qualified personnel to replace or repair your GunPod. Do not carry out repairs on the GunPod without adequate knowledge and experience. Never alter any part of the device, and use only original Beretta spare parts. POWER: The GunPod is powered by a NON RECHARGEABLE battery (type: VARTA 6620 101 501 lithium manganese 3V 70mA/h CR 1620). It is not necessary to remove the battery from a device that is not used for long periods of time. The Beretta GunPod is a multifunctional electronic device housed in a polymer insert in the pistol grip cap, and offers the possibility of: • counting the total number of shots (not resettable) • counting partial shots (up to 7 resettable sessions) • measuring the outdoor temperature in C and F degrees (thermometer) • providing an indication of the energy of ammunition fired The GunPod is a revolutionary device because it provides a count of fired shots even when the battery pack is not inserted or the battery is flat. The battery has the only function of powering the display screen which provides information related to the GunPod functions. CAUTION: The GunPod is offered as a standard component on some specific models, and may be applied upon request to the grip of your Beretta shot- ACCESS TO THE FUNCTIONS ON • Press the ON button to activate the display and select the desired function. • Every time you turn on the GunPod by pressing the ON button, the display screen shows the last function selected. WARNING: When not in use, the display screen will turn off automatically after approx. 5-6 seconds. The display screen does not light up when the shotgun is firing. • The partial shots counter will remain ac- tive for five seconds, then the screen will display the last function used prior to the screen turning off.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
THIS INSTRUCTION SHEET MUST AL-
WAYS ACCOMPANY THE FIREARM, ALSO
IN THE CASE THE FIREARM IS SOLD TO
ANOTHER PERSON.
CAUTION: Before handling the GunPod
ensure that the firearm is not loaded,
that there are no cartridges in the maga-
zine, receiver and chamber. Inspect the
firearm by looking through the ejection
port, the loading gate and the chamber.
The Beretta GunPod is a multifunctional
electronic device housed in a polymer in-
sert in the pistol grip cap, and offers the
possibility of:
• counting the total number of shots (not re-
settable)
• counting partial shots (up to 7 resettable
sessions)
• measuring the outdoor temperature in C
and F degrees (thermometer)
• providing an indication of the energy of
ammunition fired
The GunPod is a revolutionary device be-
cause it provides a count of fired shots
even when the battery pack is not inserted
or the battery is flat. The battery has the
only function of powering the display
screen which provides information related
to the GunPod functions.
CAUTION: The GunPod is offered as a
standard component on some specific
models, and may be applied upon re-
quest to the grip of your Beretta shot-
gun, if its design allows housing a Gun-
Pod. In this case, the black polymer in-
sert is located on the cap (the bottom
part of the grip), with the words "Ready
for GunPod" clearly visible.
CAUTION: Request the assistance of
qualified personnel to replace or repair
your GunPod. Do not carry out repairs
on the GunPod without adequate kno-
wledge and experience. Never alter any
part of the device, and use only original
Beretta spare parts.
POWER: The GunPod is powered by a
NON RECHARGEABLE battery (type:
VARTA 6620 101 501 lithium manganese
3V 70mA/h CR 1620). It is not necessary to
remove the battery from a device that is not
used for long periods of time.
ACCESS TO THE FUNCTIONS
• Press the ON button to activate the di-
splay and select the desired function.
• Every time you turn on the GunPod by
pressing the ON button, the display
screen shows the last function selected.
WARNING:
When not in use, the display
screen will turn off automatically after ap-
prox. 5-6 seconds. The display screen
does not light up when the shotgun is firing.
• The partial shots counter will remain ac-
tive for five seconds, then the screen will
display the last function used prior to the
screen turning off.
ON