Beretta A400 Xcel Sporting Beretta GUNPOD Instructions - Page 4

CAUTION: The Beretta GunPod device does not provide a Unit of Measure, but an indication of the cartridge energy (indirect value). The GunPod was designed to read the energy of new Factory cartridges which meet international CIP and SAAMI® specifications. The use of defective, improper, hand loaded, reloaded or re-constructed ammunition may provide incorrect energy indications. The use of such ammunition could cause product malfunctions and may void the Manufacturer's warranty. CAUTION: The value displayed may vary from cartridge to cartridge (even if they are the same type, weight and brand), even with the same type of firearm and user, due to the cartridge load and the shooter's posture. By holding the ON button down for 10 seconds, you can convert the numeric indication into a horizontal bar representation (see figure). Horizontal bar display of the maximum energy Every time you turn on the GunPod by pressing the ON button, the display shows the last function selected. B2. CARTRIDGES SESSION-TEST The GunPod offers the possibility of comparing two different types of cartridges, even having the same load, by a simple procedure: • fire 3 cartridges of the first type (A) • fire 3 cartridges of the second type (B) • access the Cartridges Session-Test fun- ction, which will display the average values indicative of the energy of the two types of cartridges. Cartridge of first type (A), medium value 45; cartridge of second type (B), medium value 52. The GunPod always stores in its memory the values recorded for the last 6 cartridges fired, therefore the cartridge comparison mode is always operative: by accessing the cartridges Session-Test, you can see the average values of the last 6th -5th -4th and 3rd -2nd -1st last cartridges fired. It is however possible to clear the stored average values by holding the ON button down for 5 seconds. WARNING: The indicative values of the cartridge energy can be stored only if the battery is charged. C. THERMOMETER This displays the ambient temperature The reading is provided in Celsius or Fahrenheit.