Bernina 330 Manual - Page 7

THIS IS ONLY APPLICABLE TO MACHINES SAFETY MANUFACTURED FOR THE UNITED KINGDOM REGULATIONS IMPORTANT The wiles in this mains lead age coloured in accordance with the following code. BLUE- NEUTRAL BROWN -LIVE NOTE. As the colours of the mains lead of this appliance may not correspond with the coloured mork wogs identifying the terminals in your plug, proceed as follows: When leaving the sewing machine unottended, the mains switch must be switched off or the plug must be removed from the socket outlet. When servicing the sewing machine, or when removing covers or changing lamps, the machine or the electrical set must be disconnected from the supply by removing the plug from the socket outlet. Connect BROWN wore to terminal marked L or coloured RED. Connect BLUE wire to terminal marked N or colourec BLACK. FIT CORRECT PLUG TO POWER CORD WHEN USING A B.S. 1363 FUSED PLUG, A 3 AMP. FUSE MUST BE FITTED. THE MAXIMUM INPUT OF LAMP: 240 V IS W. THIS APPLIANCE CONFORMS TO THE STATUTORY RADIO INTERFERENCE SUPPRESSION REGULATIONS. If the terminals of the plug ore unmarked consul' o qualified electrician before use. IMPORTANT The following safety regulations must be observed without foil- The moving needle is o source of tfonger frisk of injury to fingers). ifte sewing area must, therefore, be kept under constant observation. Monipu. lotions within the area of movement of the needle, such as changing the needle or threading the machine and all manipulations with open covers, must only be performed with the ma• chine switched off (main switch set to off position). When cleaning or lubricating the machine or chonging the lamp and during interruptions in sewing or offer completion of work, the machine must bodisconnedeclfrom thepowor supply by pulling out the mains plug. Repairs la the electric section, especially the changing of the lead wire to the foot control unil,may only be carriedout by one of our service agencies. 6