Bernina 800DL Manual - Page 14
Cleaning, oiling
View all Bernina 800DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Cleaning and oiling Cleaning the machine. During sewing pieces of thread and fluff collect under the needle plate and around the hook. A The cover plate of the free arm should be removed from time to time so that the sewing fluff can be cleaned away. - 11- X. •ritiVe L. • art• • •"er- \\ X ' Cleaning and oiling the hook. Remove After cleaning pour a few drops of oil bobbin case. With the forefinger of he into the shuttle race. Insert the shuttle right hand press latch to the left. The again with the left hand. Lock the bridge locking bridge together with the hook together with the shuttle race cover, race cover can now be turned down. making sure that the spring snaps back into position. Test by turning the hand- Take off cover-plate from free-arm. Remove presser foot or needle, open hinged cover. Then hold the coverplate with the left hand and press the release lever at the same time with ail ..,• ,4 wheel as a precautionary measure. Replace arm cover and re-screw tightly. When the bobbin case is inserted the hinged shuttle cover can be closed. the forefinger of the right hand. lI ti • try r, Now the hook can be taken out and the hook race cleaned with a small brush If the machine has 'been standing in a cold room, it should be brought into a and cotton duster. Never use hard tools such as screwdrivers and scissors for removing thread particles. warm room about an hour before use, After removing the cover, the feed dog so that it can warm up to room tempera- is free and can then be properly ture and the oil in the bearings will cleaned as also can the lower side of again become fluid. the needle plate on the arm-cover. 14